הוסף לעגלה

Manley SLAM Compressor Limiter Pre Amp

קומפרסור לימיטר סטריאופוני אנלוגי עם כניסות ויציאות דיגיטליות
אחריות: 12 חודשי אחריות יבואן רשמי
זמן אספקה: 7 ימי עסקים
למה לקוחות קונים אצלנו:
  • אחריות: 12 חודשי אחריות יבואן רשמי  
  • קניה מאובטחת ושירות לקוחות מעולה 
12 חודשי אחריות יבואן רשמי חודשי אחריות
קניה בטוחה

מידע נוסף

The Manley SLAM! stands for "stereo limiter and microphone preamplifier" 2 tube microphone preamplifiers 48 V phantom power, phase reverse 60 dB of gain 20 dB more gain in the limiter Accommodate virtually any microphone Combined ELOP with a fast FET-based brick-wall limiter Give your line-level instruments a warm-up using the front-panel DI inputs Electro-optical and FET-based brick-wall limiter can be used simultaneously or separately on each channel Manley's famous electro-optical ELOP Circuite Transformer-balanced I/O and 1/4" phone jacks 4 TRS jacks Inserts external equalizers into the Linking multiple units for surround purposes

מאפיינים עיקריים

Input Tubes: 2 × 12AT7A NOS GE specially selected by Manley Labs for low noise and stable bias
Output Tubes: 2 × 6414W NOS USA dual triodes
I/O: Manley transformer-coupled, balanced inputs and outputs
Microphone preamplifier: selectable 48 V phantom power and phase reverse
Gain: 60 dB max microphone preamplifier, 43 dB max DI, 20 dB max limiter gain
Input Impedance: 2000 ohms mic pre, 1meg ohms DI
FET Limiter attack: approx. 100S
FET Limiter release: 10mS to 2Sec
FET Limiter ratio: better than 20:1
ELOP Limiter attack: approx. 10mS for 6 dB GR
ELOP Limiter release: 2.5S
ELOP Limiter ratio: 10:1
Frequency response: 5 Hz to 60 kHz
Maximum output: 32 dBm, +30 dBm (into 1 kOhm load)
THD
N: <0.05% @ 1 kHz
Dynamic range: 115 dB typical
Output impedance: 200 Ohms
Power consumption slam!: 0.480 Amps (480 milliamps = 480 mA) @ 120 V = 57.6 Watts, 0.240 Amps (240 milliamps = 240 mA) @ 240 V = 57.6 Watts
Mains voltage frequency: 50~ 60 Hz
Size: 19″ × 12″ × 3.5″ (occupies 2 RU)
Shipping weight: 25 lb

לדוגמה:
//